Support
FAQs
Q.
[IP Solution] Can I connect ACTi's analog encoders to IP decoders?
A.
Select "RTP" and set "RTP B2 Frame" to "Disabled".
听
[IP decoder settings]
Open the IP decoder setting screen with a web browser and register the encoder.
1. Select "Camera Registration" to display the camera list.
2. Check the position number and click "Manual Registration".
3. Select "DirectUri" for "Protocol", enter the following information, and click "OK".
| Item | Value |
|---|---|
| Camera Name | Arbitrary name |
| IP Address | Encoder IP address |
| Port | 554 |
| Protocol | DirectUri |
| Username | Encoder username |
| Password | Encoder password |
| URI |
rtsp://{Encoder IP address}:554/channel1/stream1
For听V2224,听specify听which听camera's听image听to display听using听channel1听to听channel4.
|
| Connection Method | RTP over UDP |
4. Click "Apply".
The video from the camera connected to the encoder is displayed on the IP decoder.
听
Troubleshooting
鈥� The video stops or an error message appears
Make sure that "RTP B2 Frame" in the encoder is set to "Disabled".
鈥� No image is displayed
Make sure that the username, password, and URI you entered are correct. Select "Port Mapping" in the encoder and make sure that "RTSP Server Port" is set to "554".
听
鈻� Model锛欶DF2312W-IP FAQ ranking
| No. | Question | Category | Date |
|---|---|---|---|
| 1 |
DuraVision |
November 27, 2025 | |
| 2 |
DuraVision |
November 27, 2025 | |
| 3 |
DuraVision |
November 27, 2025 | |
| 4 |
DuraVision |
November 27, 2025 | |
| 5 |
DuraVision |
November 27, 2025 | |
| 6 |
DuraVision |
November 27, 2025 | |
| 7 |
DuraVision |
November 27, 2025 |
鈻� Model锛欶DF2312W-IP Latest updates
| No. | Question | Category | Date |
|---|---|---|---|
| 1 |
DuraVision |
November 27, 2025 | |
| 2 |
DuraVision |
November 27, 2025 | |
| 3 |
DuraVision |
November 27, 2025 | |
| 4 |
DuraVision |
November 27, 2025 | |
| 5 |
DuraVision |
November 27, 2025 | |
| 6 |
DuraVision |
November 27, 2025 | |
| 7 |
DuraVision |
November 27, 2025 |
